The Pallet Changer is probably the most sophisticated model we build, this unique
system enables the operator to swap pallets from beneath the load without any necessity
to touch them by hand.
All pallet changers are painted with two coats of zinc primer and a 2 pack epoxy acrylic top coat as standard.
Designed and built to meet customer requirements on stack heights where
goods need to be stable when resting on their side,the pallet changers side clamping
maintains the integrity of the load. This would always be a totally automated system
and supplied with the appropriate fixed guarding.
The Pallet Changer in operation:
| Pallet Changer Specifications | ||||
| Standard Model | ||||
| Jaw opening | 2.05m MAX; 0.60m MIN | |||
| Load table with grippers to handle pallets 800,1000 or 1200mm wide | ||||
| Load capacity | 1500 kgs | |||
| Power supply | 3ph 400v 20A | |||
| Motor size | 4kw | |||
| Weight | 1800 kgs | |||
| Controls | Fully auto-sequenced control with manual override, touch screen operated from console at the front of the machine. | |||
| Operating space with floor fixed guards on 3 sides |
3.03m wide x 4.82m deep x 2.75m high. |
|||
| Guarding | 2m high floor fixed guards to 3 sides with photo-electric safety beams at the front. | |||
| Standard dimensions | 2.16m x 2.50m x 2.35m + separate guards | |||